Home Suite Home

Making DIY solar panels can be fairly easy as long as you prepare the materials you need for the project. Who, with craftsmanship average should be able to simply the task is completed, and special tools are needed. All you need are in the form of equipment: * a * saw, wood saw * a * a hammer, screwdriver, drill * * * * * * nails, screws measureMaterials brush has a group of files, you must be purchased include: * 10 mm aluminum annealed copper tube 16SWG * a * leaves * fiber wool navy times * * 4mm glass timber for frameThe copper tubes are used to carry water through the collector d ‘. Copper has high thermal conductivity, making it perfect for the job. It is available in most stores plumber “and is available in 20m, 25m and 30m coils. Once you’ve assembled tubes of copper, do you want the attachment to the absorber plate black. It will collect the heat of the sun and the copper pipes remain. It is recommended to use aluminum as an absorber plate, because it is cheaper than copper plates, and it is easier in most places . The absorber plate is encased in a wooden frame. It is made of hardwood with a navy carrier sheet once. If you take more time to have a protective coating is applied. This will be a few more years of service. The last part of the panel DIY solar heating is the transparent cover. This will prevent heat loss, especially in cold weather. Glass is preferred because of its light transmittance higher. If you can not pay me a float, acrylic plates should be an appropriate substitute. The disadvantage of using the acrylic film is that they are prone to scratching and fading in May The effectiveness of DIY solar panels might not be as good as the effectiveness of commercially available, but they can get good results. And imagine the savings you can if you do too. One of the solar panels will cost DIY third Price book business. Not only that, but you will cut your electricity bill, even if you use it. If built right, the panel has an expected life of twenty years. He ‘ there are no moving parts are involved, and no maintenance should be kept on board. Construction of DIY solar panels is not complicated, and is one of the easier DIY solar energy projects. It is a project you should definitely try it if you’re interested in setting up systems for DIY or solar energy systems. You can use the panel to your pool or your home with heat of hot water.